Concrete Driveway Installation in Spicewood, TX

Licensed driveway contractors serving Spicewood and Travis.

Spicewood, TX
📍 Zip Codes: 78669

Concrete driveway installation in Spicewood, TX costs $6 to $12 per square foot for a standard 4-inch broom-finish pour in 2026. A two-car driveway in Spicewood (600 square feet) runs $3,600 to $7,200 fully installed with proper sub-base preparation, #3 rebar reinforcement, and control joints. Decorative options including stamped concrete ($12 to $25/sq ft) and exposed aggregate ($10 to $16/sq ft) are available from Spicewood contractors.

Metal America Concrete connects Spicewood, TX homeowners with licensed driveway contractors serving Travis and surrounding areas. Our Spicewood contractors provide free on-site estimates, written contracts, and workmanship warranties. Zip codes served include 78669.

Services Available in Spicewood

  • New Driveway Installation
  • Driveway Replacement
  • Driveway Extension
  • Driveway Repair

Concrete Driveway Costs in Spicewood for 2026

Concrete driveway costs in Spicewood, TX range from $6 to $25 per square foot depending on finish type and project complexity. Standard broom-finish driveways in Spicewood cost $6 to $10 per square foot. Colored concrete adds $1 to $3 per square foot. Exposed aggregate runs $10 to $16 per square foot. Stamped designs cost $12 to $25 per square foot in Spicewood. All prices include excavation, gravel sub-base, forming, rebar, concrete, finishing, control joints, and cleanup.

Common driveway project costs in Spicewood include single-car driveways ($2,100 to $4,200), two-car driveways ($3,600 to $7,200), and large extended driveways ($6,000 to $15,000+). Driveway replacement in Spicewood that includes demolition of the old surface adds $2 to $4 per square foot to these costs.

Concrete Driveway Specifications in Spicewood

Professional driveway contractors in Spicewood, TX follow structural specifications that ensure 25 to 50 years of service. Standard Spicewood driveway specs include a minimum 4-inch slab thickness (5 to 6 inches for heavy vehicles), 4 to 6 inches of compacted gravel sub-base, #3 rebar on 18-inch centers in a grid pattern, 3000 PSI concrete mix, control joints every 8 to 12 feet, and a 1/8 inch per foot drainage slope away from the garage.

These specifications are not optional. Driveways in Spicewood built without adequate thickness, reinforcement, or sub-base preparation crack and fail within 5 to 10 years. Driveways built to spec routinely last 30 to 50 years. The quality of the installation matters far more than the concrete itself.

Driveway Replacement vs. Resurfacing in Spicewood

If your existing driveway in Spicewood has surface wear, staining, or minor cosmetic issues but is structurally sound, resurfacing at $3 to $10 per square foot may be the better option. If your driveway has deep cracks, active settling, crumbling edges, or structural failure, full replacement at $6 to $12 per square foot (plus $2 to $4 for demolition) is the right choice. A Spicewood driveway contractor will assess your existing surface and recommend the most cost-effective solution.

Metal America Concrete contractors in Spicewood evaluate every driveway honestly and provide both repair and replacement options when applicable so you can make an informed decision based on condition, cost, and expected lifespan of each approach.

Frequently Asked Questions

A concrete driveway in Spicewood, TX costs $6 to $12 per square foot for standard installation in 2026. A two-car driveway (600 sq ft) in Spicewood runs $3,600 to $7,200. Stamped driveways cost $12 to $25 per square foot in Spicewood.

A new concrete driveway in Spicewood, TX takes 2 to 4 days for the pour and finish. The driveway should cure for 7 days before vehicle traffic and reaches full strength at 28 days. Driveway replacements that include demolition of the old surface add 1 to 2 days.

Most new concrete driveways and driveway replacements in Spicewood require a building permit from Travis or your local jurisdiction. Permit requirements in Spicewood typically include a site plan showing driveway location, setbacks, and drainage. Your Spicewood contractor can advise on specific permit requirements for your project.

Standard residential driveways in Spicewood, TX should be a minimum of 4 inches thick with #3 rebar on 18-inch centers. If your driveway in Spicewood will carry heavy vehicles like RVs, boats, or work trucks, your contractor should pour 5 to 6 inches thick with closer rebar spacing for added strength.

A properly installed concrete driveway in Spicewood, TX lasts 25 to 50 years. Sealing every 2 to 3 years, avoiding deicing salts, and repairing cracks promptly extend the lifespan significantly. The quality of sub-base preparation and reinforcement during installation is the biggest factor in long-term durability.

Concrete driveways require proper excavation, sub-base compaction, rebar placement, formwork, finishing, and control joint cutting that demand professional equipment and experience. DIY driveways in Spicewood frequently fail within 5 to 10 years due to inadequate sub-base, missing reinforcement, or improper finishing. Professional installation in Spicewood is strongly recommended.

Standard 3000 PSI concrete is the most common mix for residential driveways in Spicewood, TX. In areas of Spicewood with freeze-thaw cycles, air-entrained concrete is recommended to resist surface spalling. High-traffic commercial driveways may use 4000 PSI for additional strength. Your Spicewood contractor will specify the right mix for your application.

Get a Free Concrete Driveway Quote in Spicewood, TX

Ready for a new driveway? Metal America Concrete connects you with licensed driveway contractors in Spicewood who provide free on-site estimates. Compare quotes, review finish options, and choose the best contractor for your Spicewood driveway project.

Get Started Free