Concrete driveway installation in Pflugerville, TX costs $6 to $12 per square foot for a standard 4-inch broom-finish pour in 2026. A two-car driveway in Pflugerville (600 square feet) runs $3,600 to $7,200 fully installed with proper sub-base preparation, #3 rebar reinforcement, and control joints. Decorative options including stamped concrete ($12 to $25/sq ft) and exposed aggregate ($10 to $16/sq ft) are available from Pflugerville contractors.
Metal America Concrete connects Pflugerville, TX homeowners with licensed driveway contractors serving Travis and surrounding areas. Our Pflugerville contractors provide free on-site estimates, written contracts, and workmanship warranties. Zip codes served include 78660.
Concrete Services in Pflugerville
New Driveway Installation
Complete concrete driveway installation in Pflugerville, TX from excavation to final finish. Standard 4-inch thickness with rebar reinforcement. Broom-finish, colored, stamped, and exposed aggregate options available. Most Pflugerville driveway installations take 2 to 4 days.
Driveway Replacement
Full driveway tear-out and replacement in Pflugerville. Includes demolition of old surface, disposal, soil preparation, new sub-base, and complete concrete pour. Replacement in Pflugerville adds $2 to $4 per square foot for demolition costs.
Driveway Extension
Extend your existing driveway in Pflugerville, TX for additional parking, turnaround areas, or side access. Extensions are poured to match existing driveway height and finish. Pflugerville driveway extensions cost $6 to $12 per square foot for the new section.
Driveway Repair
Fix cracks, spalling, and surface damage on existing driveways in Pflugerville. Repair options include crack sealing, partial section replacement, and resurfacing overlays. Pflugerville driveway repair costs $200 to $2,000 depending on damage extent.
Concrete Driveway Costs in Pflugerville for 2026
Concrete driveway costs in Pflugerville, TX range from $6 to $25 per square foot depending on finish type and project complexity. Standard broom-finish driveways in Pflugerville cost $6 to $10 per square foot. Colored concrete adds $1 to $3 per square foot. Exposed aggregate runs $10 to $16 per square foot. Stamped designs cost $12 to $25 per square foot in Pflugerville. All prices include excavation, gravel sub-base, forming, rebar, concrete, finishing, control joints, and cleanup.
Common driveway project costs in Pflugerville include single-car driveways ($2,100 to $4,200), two-car driveways ($3,600 to $7,200), and large extended driveways ($6,000 to $15,000+). Driveway replacement in Pflugerville that includes demolition of the old surface adds $2 to $4 per square foot to these costs.
Concrete Driveway Specifications in Pflugerville
Professional driveway contractors in Pflugerville, TX follow structural specifications that ensure 25 to 50 years of service. Standard Pflugerville driveway specs include a minimum 4-inch slab thickness (5 to 6 inches for heavy vehicles), 4 to 6 inches of compacted gravel sub-base, #3 rebar on 18-inch centers in a grid pattern, 3000 PSI concrete mix, control joints every 8 to 12 feet, and a 1/8 inch per foot drainage slope away from the garage.
These specifications are not optional. Driveways in Pflugerville built without adequate thickness, reinforcement, or sub-base preparation crack and fail within 5 to 10 years. Driveways built to spec routinely last 30 to 50 years. The quality of the installation matters far more than the concrete itself.
Driveway Replacement vs. Resurfacing in Pflugerville
If your existing driveway in Pflugerville has surface wear, staining, or minor cosmetic issues but is structurally sound, resurfacing at $3 to $10 per square foot may be the better option. If your driveway has deep cracks, active settling, crumbling edges, or structural failure, full replacement at $6 to $12 per square foot (plus $2 to $4 for demolition) is the right choice. A Pflugerville driveway contractor will assess your existing surface and recommend the most cost-effective solution.
Metal America Concrete contractors in Pflugerville evaluate every driveway honestly and provide both repair and replacement options when applicable so you can make an informed decision based on condition, cost, and expected lifespan of each approach.
Free Driveway Estimate in Pflugerville, TX
Get a free concrete driveway estimate from a licensed contractor in Pflugerville, TX. A Pflugerville contractor will measure your driveway area, assess site conditions, discuss finish options, and provide a written estimate with material specs, timeline, and total cost. There is no charge for the estimate and no obligation to proceed. Metal America Concrete serves Pflugerville, Travis, and surrounding areas.
Frequently Asked Questions
A concrete driveway in Pflugerville, TX costs $6 to $12 per square foot for standard installation in 2026. A two-car driveway (600 sq ft) in Pflugerville runs $3,600 to $7,200. Stamped driveways cost $12 to $25 per square foot in Pflugerville.
A new concrete driveway in Pflugerville, TX takes 2 to 4 days for the pour and finish. The driveway should cure for 7 days before vehicle traffic and reaches full strength at 28 days. Driveway replacements that include demolition of the old surface add 1 to 2 days.
Most new concrete driveways and driveway replacements in Pflugerville require a building permit from Travis or your local jurisdiction. Permit requirements in Pflugerville typically include a site plan showing driveway location, setbacks, and drainage. Your Pflugerville contractor can advise on specific permit requirements for your project.
Standard residential driveways in Pflugerville, TX should be a minimum of 4 inches thick with #3 rebar on 18-inch centers. If your driveway in Pflugerville will carry heavy vehicles like RVs, boats, or work trucks, your contractor should pour 5 to 6 inches thick with closer rebar spacing for added strength.
A properly installed concrete driveway in Pflugerville, TX lasts 25 to 50 years. Sealing every 2 to 3 years, avoiding deicing salts, and repairing cracks promptly extend the lifespan significantly. The quality of sub-base preparation and reinforcement during installation is the biggest factor in long-term durability.
Concrete driveways require proper excavation, sub-base compaction, rebar placement, formwork, finishing, and control joint cutting that demand professional equipment and experience. DIY driveways in Pflugerville frequently fail within 5 to 10 years due to inadequate sub-base, missing reinforcement, or improper finishing. Professional installation in Pflugerville is strongly recommended.
Standard 3000 PSI concrete is the most common mix for residential driveways in Pflugerville, TX. In areas of Pflugerville with freeze-thaw cycles, air-entrained concrete is recommended to resist surface spalling. High-traffic commercial driveways may use 4000 PSI for additional strength. Your Pflugerville contractor will specify the right mix for your application.