Why Choose Us in Manor
Licensed driveway contractors serving Manor and Travis.
Concrete driveway installation in Manor, TX costs $6 to $12 per square foot for a standard 4-inch broom-finish pour in 2026. A two-car driveway in Manor (600 square feet) runs $3,600 to $7,200 fully installed with proper sub-base preparation, #3 rebar reinforcement, and control joints. Decorative options including stamped concrete ($12 to $25/sq ft) and exposed aggregate ($10 to $16/sq ft) are available from Manor contractors.
Metal America Concrete connects Manor, TX homeowners with licensed driveway contractors serving Travis and surrounding areas. Our Manor contractors provide free on-site estimates, written contracts, and workmanship warranties. Zip codes served include 78653.
Concrete Driveway Costs in Manor for 2026
Concrete driveway costs in Manor, TX range from $6 to $25 per square foot depending on finish type and project complexity. Standard broom-finish driveways in Manor cost $6 to $10 per square foot. Colored concrete adds $1 to $3 per square foot. Exposed aggregate runs $10 to $16 per square foot. Stamped designs cost $12 to $25 per square foot in Manor. All prices include excavation, gravel sub-base, forming, rebar, concrete, finishing, control joints, and cleanup.
Common driveway project costs in Manor include single-car driveways ($2,100 to $4,200), two-car driveways ($3,600 to $7,200), and large extended driveways ($6,000 to $15,000+). Driveway replacement in Manor that includes demolition of the old surface adds $2 to $4 per square foot to these costs.
Concrete Driveway Specifications in Manor
Professional driveway contractors in Manor, TX follow structural specifications that ensure 25 to 50 years of service. Standard Manor driveway specs include a minimum 4-inch slab thickness (5 to 6 inches for heavy vehicles), 4 to 6 inches of compacted gravel sub-base, #3 rebar on 18-inch centers in a grid pattern, 3000 PSI concrete mix, control joints every 8 to 12 feet, and a 1/8 inch per foot drainage slope away from the garage.
These specifications are not optional. Driveways in Manor built without adequate thickness, reinforcement, or sub-base preparation crack and fail within 5 to 10 years. Driveways built to spec routinely last 30 to 50 years. The quality of the installation matters far more than the concrete itself.
Driveway Replacement vs. Resurfacing in Manor
If your existing driveway in Manor has surface wear, staining, or minor cosmetic issues but is structurally sound, resurfacing at $3 to $10 per square foot may be the better option. If your driveway has deep cracks, active settling, crumbling edges, or structural failure, full replacement at $6 to $12 per square foot (plus $2 to $4 for demolition) is the right choice. A Manor driveway contractor will assess your existing surface and recommend the most cost-effective solution.
Metal America Concrete contractors in Manor evaluate every driveway honestly and provide both repair and replacement options when applicable so you can make an informed decision based on condition, cost, and expected lifespan of each approach.
Free Driveway Estimate in Manor, TX
Get a free concrete driveway estimate from a licensed contractor in Manor, TX. A Manor contractor will measure your driveway area, assess site conditions, discuss finish options, and provide a written estimate with material specs, timeline, and total cost. There is no charge for the estimate and no obligation to proceed. Metal America Concrete serves Manor, Travis, and surrounding areas.
Frequently Asked Questions
A concrete driveway in Manor, TX costs $6 to $12 per square foot for standard installation in 2026. A two-car driveway (600 sq ft) in Manor runs $3,600 to $7,200. Stamped driveways cost $12 to $25 per square foot in Manor.
A new concrete driveway in Manor, TX takes 2 to 4 days for the pour and finish. The driveway should cure for 7 days before vehicle traffic and reaches full strength at 28 days. Driveway replacements that include demolition of the old surface add 1 to 2 days.
Most new concrete driveways and driveway replacements in Manor require a building permit from Travis or your local jurisdiction. Permit requirements in Manor typically include a site plan showing driveway location, setbacks, and drainage. Your Manor contractor can advise on specific permit requirements for your project.
Standard residential driveways in Manor, TX should be a minimum of 4 inches thick with #3 rebar on 18-inch centers. If your driveway in Manor will carry heavy vehicles like RVs, boats, or work trucks, your contractor should pour 5 to 6 inches thick with closer rebar spacing for added strength.
A properly installed concrete driveway in Manor, TX lasts 25 to 50 years. Sealing every 2 to 3 years, avoiding deicing salts, and repairing cracks promptly extend the lifespan significantly. The quality of sub-base preparation and reinforcement during installation is the biggest factor in long-term durability.
Concrete driveways require proper excavation, sub-base compaction, rebar placement, formwork, finishing, and control joint cutting that demand professional equipment and experience. DIY driveways in Manor frequently fail within 5 to 10 years due to inadequate sub-base, missing reinforcement, or improper finishing. Professional installation in Manor is strongly recommended.
Standard 3000 PSI concrete is the most common mix for residential driveways in Manor, TX. In areas of Manor with freeze-thaw cycles, air-entrained concrete is recommended to resist surface spalling. High-traffic commercial driveways may use 4000 PSI for additional strength. Your Manor contractor will specify the right mix for your application.