Home / Blog / 20×20 Concrete Slab Cost and 2026 Ranges

20×20 Concrete Slab Cost and 2026 Ranges

March 10, 2026 • 3 min read

Table of Contents

A 20×20 concrete slab costs $2,400 to $4,800 in 2026 at $6 to $12 per square foot for a standard 4-inch thick broom finish slab. At 5 inches thick (recommended for garages), the cost rises to $2,800 to $5,600. The 400 square foot area requires 4.94 cubic yards of concrete at 4 inches thick, putting material cost at $690 to $825. This is the most common size for two-car garages, large workshops, and generous patios.

20×20 Slab Cost by Thickness

At 4 inches thick, a 20×20 slab costs $2,400 to $4,800 and uses 4.94 cubic yards of concrete. This thickness works for patios, storage buildings, and light-use workshops. Standard 3,000 PSI concrete with wire mesh or #3 rebar at 18 inches on center provides adequate reinforcement.

At 5 inches thick, a 20×20 slab costs $2,800 to $5,600 and uses 6.17 cubic yards. This is the recommended thickness for residential garage floors and driveways. The extra inch of concrete increases load capacity by approximately 40% over a 4-inch slab.

At 6 inches thick, a 20×20 slab costs $3,200 to $6,400 and uses 7.41 cubic yards. Use 6-inch thickness for metal building foundations, heavy equipment storage, and commercial applications. The 20×20 at 6 inches with #3 rebar at 18 inches on center handles virtually any residential or light commercial load.

20×20 Slab Common Applications

Two-car garage floor slabs are the primary application for 20×20 concrete. A 20×20 garage comfortably fits two standard vehicles with room for workbenches along the walls. Pour at 5 inches thick with a monolithic thickened edge (12 to 16 inches deep at the perimeter) for structural wall support.

Large patios at 20×20 provide 400 square feet of outdoor living space. At 4 inches thick with a broom or stamped finish, the slab supports outdoor furniture, grills, and entertaining. Stamped concrete on a 20×20 patio costs $4,800 to $8,000.

Workshop and hobby building foundations use the 20×20 size for woodworking shops, home gyms, and art studios. A thicker 5 to 6 inch slab with a smooth trowel finish creates a solid, flat work surface.

20×20 Slab Material Breakdown

Concrete (5.5 yards at 4 inches with 10% overage) costs $770 to $908 at $140 to $165 per yard. Compacted gravel base (4 inches deep, 400 square feet) costs $150 to $250. Form lumber and stakes cost $80 to $150 for the 80 linear feet of perimeter. Rebar or wire mesh costs $80 to $150. Vapor barrier costs $20 to $35.

Total material cost for a DIY 20×20 slab runs $1,100 to $1,500. Professional labor for the same slab adds $1,300 to $3,300, putting the total installed price at $2,400 to $4,800.

How much does a 20×20 concrete slab cost?

A 20×20 concrete slab costs $2,400 to $4,800 at 4 inches thick in 2026. At 5 inches thick (for garages), the cost is $2,800 to $5,600. At 6 inches thick, expect $3,200 to $6,400. These prices include site preparation, gravel base, forming, reinforcement, concrete, finishing, and cleanup.

How many yards of concrete for a 20×20 slab?

A 20×20 slab at 4 inches thick requires 4.94 cubic yards. Order 5.5 yards with overage. At 5 inches thick, you need 6.17 yards (order 7). At 6 inches thick, you need 7.41 yards (order 8). At $140 per yard, concrete material for a 4-inch 20×20 slab costs approximately $770.

Is a 20×20 slab big enough for a 2-car garage?

A 20×20 is the minimum comfortable size for a two-car garage. Two standard vehicles fit with approximately 2 feet of clearance between them and limited space for storage. A 20×24 or 24×24 provides more comfortable clearance and room for workbenches or shelving along the walls.

Frequently Asked Questions

How thick should a 20×20 garage slab be?

A 20×20 garage slab should be 5 inches thick for residential vehicle traffic. Use 6 inches for heavy trucks or workshop equipment. The thickened perimeter edge (12 to 16 inches deep, 12 to 16 inches wide) provides structural support for the garage walls. Reinforce with #3 rebar at 18 inches on center throughout.

Can I pour a 20×20 slab myself?

A 20×20 slab requires approximately 5 to 6 cubic yards of concrete, which is a significant pour. You need a crew of at least 3 to 4 people to place, screed, and finish the concrete within the 60 to 90 minute working window. This is not a one-person project. Professional installation is recommended for slabs this size unless you have concrete experience.

Concrete

20×20 at 4 inches (installed)

$2,400

$4,800

$3,600

20×20 at 5 inches (installed)

Start Quoting Concrete Projects Today

Use the Metal America Concrete app to instantly quote, sell, and manage concrete pad installations.

Get Started Free